轻型防护钢(防弹钢板)
Light Ballistic Protec
牌号 Grade:NP370、NP450、NP500、 NP550、NP600
交货标准 Delivery Condition:Q+T
执行标准: Ref. Standard: 企业标准/NISCO Standard
厚度范围 Thickness: T =4~20mm
尺寸公差 Tolerances:执行 EN 10029标准 Dimensional tolerances according to EN 10029
轻型防护用钢板因具有良好的防弹性能、冷成形性能和焊接性能,可广泛应用于民用和军用领域,如私人防弹车、银行运钞车、装甲运兵车以及反恐用车辆等。
Light protection plates produced by NISCO can be widely applied in the civil and military fields such as bulletproof cars,cash-in-transit vehicles,armoured personnel carrier and anti-terrorism vehicles with the excellent bullet-proof performances,good cold fromability and weldability.
NIJ 0101.06
防护等级 Protection level | 弹药/威力 Weapon | 出口速度 Muzzle velocity(m/s) | 距离 Range/m | NP450 | NP500 | NP550 |
III | 7.62mm FMJ | 838±10 | 15 | 8.0 | 6.5 | 5.5 |
IV | 30-06 AP | 868±15 | 15 | 15.0 | 14 |
STANAG 4569
防护等级 Protection level | 弹药/威力 Weapon | 出口速度 Muzzle velocity(m/s) | 距离 Range/m | NP450 | NP500 | NP550 |
1 | 5.56mm×45 NATO SS109 | 900±20 | 10 | 6.5 | 6.0 | 5.0 |
1 | 7.62mm×51NATO ball(M80) | 833±20 | 10 | 8.0 | 6.5 | 5.5 |
1 | 5.56mm×45 M193 | 937±20 | 10 | 10.0 | 9.5 | 7.2 |
2 | 7.62mm×39API BZ | 695±20 | 10 | 12.0 | 12.0 | |
3 | 7.62mm54R B32 API | 854±20 | 10 | 15.0 | 14.0 |
GA 141-2010
防护等级 Protection level | 弹药/威力 Weapon | 出口速度 Muzzle velocity(m/s) | 距离 Range/m | NP450 | NP500 | NP550 |
5 | 1956年式7.62 普通 弹(钢芯) | 725±10 | 10 | 4.0 |
GA 668-2006
防护等级 Protection level | 弹药/威力 Weapon | 出口速度 Muzzle velocity(m/s) | 距离 Range/m | NP450 | NP500 | NP550 |
A | 51年B式7.62mm手枪弹(钢芯) | 505±25 | 10 | 40 | ||
C | 30-06 AP | 940±20 | 20 | 8.5 | 6.5 | 6.0 |
国内其他通用枪械 Other domestic general firearms
枪械 Gun | 弹药/威力 Weapon | 出口速度 Muzzle velocity(m/s) | 距离 Range/m | NP450 | NP500 | NP550 |
81步枪 81 type rifle | 51年B式7.62mm手枪弹(钢芯) | 505±25 | 10 | 40 | ||
C | 30-06 AP | 940±20 | 20 | 8.5 | 6.5 | 6.0 |
机械性能
Mechanical Properties
Grade | Rel/MPa | Rm/MPa | A50/% | Akv/J | Hardness HBW |
NP 370 | ≥950 | ≥1150 | ≥12 | ≥27 | 380-430 |
NP450 | ≥1100 | ≥1350 | ≥10 | ≥25 | 420-480 |
NP500 | ≥1250 | ≥1550 | ≥8 | ≥20 | 480-540 |
NP550 | ≥1350 | ≥1650 | ≥7 | ≥15 | 530-590 |
注Note:
① 强度和延伸率不在质保书中体现;
The value will not be reported on the test certificate.
② -40℃横向冲击,3点平均值,单值不小于最小平均值的70%;厚度小于12mm采用小尺寸式样,最小平均值正比例于试样横截面积。
Lmpact test at -40℃,transverse to the rolling direction; Charpy test average of three values,single value min 70% of apecified average; For plate thicknesses under 12mm subsize Charpy V-specimens are used, the specified minimum value is then proportional to the specimens cross-section.
③ 硬度为表面硬度 Surface hardness as hardness value.